Sony Handycam DCR-TRV510E Operating Instructions Manual page 103

Changing the MENU settings
Icon/item Mode
CONTINUOUS*
r OFF
QUALITY* r STANDARD
FLD./FRAME* r FIELD
PROTECT*
r OFF
SLIDE SHOW*
DELETE ALL*
FORMAT*
PHOTO SAVE*
* DCR-TRV510E only
** These items are displayed only when the STANDBY switch is set to MEMORY.
Notes on FORMAT
Format (initialize) the builf-in flash memory when the warning indicator
To format (initialize) the built-in flash memory, carry out the following operation.
(1) Set the POWER switch to CAMERA or PLAYER. When you set the POWER switch to CAMERA,
turn STANDBY to MEMORY.
(2) Press MENU to display the MENU settings.
(3) Turn the SEL/PUSH EXEC dial to select
(4) Turn the SEL/PUSH EXEC dial to select FORMAT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select OK, then press the dial.
To cancel formatting, select RETURN, then press the dial.
•Formatting erases all information in the built-in flash memory, inclusing the protected image data.
Check the contents of the flash memory befor formatting.
•Be sure that the battery pack is fully charged when formatting the built-in flash memory. Formatting
takes about three seconds.
•Do not turn the POWER switch or press any button while the display shows
Meaning
Not to store continuously
ON To record 3 or 4 pictures continuously
MULTI SCRN To record 9 pictures continuously
To record still pictures in the standard image quality
mode
FINE To store still pictures in the fine image quality mode
To record moving subjects
FRAME To record stopping subjects in high quality
Not to protect still pictures
ON To protect selected still pictures against accidental
erasure. (p. 96)
To play back images in a continuous loop.
(p. 94)
To delete all the images (p. 97)
To format the built-in flash memory
To duplicate still pictures (p. 86)
, then press the dial.
POWER
switch
CAMERA**
PLAYER
CAMERA**
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER
CAMERA**
PLAYER
flashes fast.
"FORMATTING" .
103