Remote Ctrl - Sony Handycam DCR-TRV461E Operation Manual

REMAINING

REMOTE CTRL

REC LED
BEEP
80
Using the Menu
GAUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch
ON
Select to always display the remaining tape indicator.
GON
Select when using the Remote Commander supplied with your
camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
GON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
OFF Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the recording lamp.
GMELODY Select to sound a melody when you start/stop recording, operate the
touch panel, or when an unusual condition occurs on your camcorder.
NORMAL Select to sound a beep instead of the melody.
OFF
Select to cancel the melody, the beep sound, the shutter sound or touch
panel operation confirmation beep.
(play/pause).