Using the
(MEMORY SET) menu
– QUALITY/IMAGE SIZE/ALL ERASE/NEW
FOLDER, etc
You can select items listed below on the
MEMORY SET menu. To select items, see
"Selecting menu items" (p. 59).
STILL SET
QUALITY
GFINE (
STANDARD (
FLD/FRAME
GFIELD
FRAME (
MOVIE SET
IMAGE SIZE
G320 × 240
(
160 × 112 (
REMAINING
GAUTO
)
Select to record still images with the fine image quality (compressed
to about 1/4).
) Select to record still images with the standard image quality
(compressed to about 1/10).
To record moving subjects correcting jitter (p. 30).
)
To record stationary subjects in high quality.
Select to record movies for playing on a large screen, or to record
)
clearer pictures.
) Select to record for longer time.
Select to display the remaining capacity of the "Memory Stick" in the
following cases:
• After inserting a "Memory Stick" with the POWER switch in the
CAMERA-MEMORY mode (for about 5 seconds).
• When the remaining capacity of the "Memory Stick" is less than 2
minutes after the CAMERA-MEMORY mode is selected.
• At the starting or ending point of the movie (for approximately 5
seconds).
The default settings are marked with G. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
currently operate. Unavailable items will be
grayed out.
60min
20
FINE
MEMORY SET
STILL SET
MOVIE SET
FORMAT
OK
,continued
65
Using the Menu