Data Code; Remote Ctrl - Sony Handycam DCR-HC30 Operation Manual

USB-PLY/EDT

DATA CODE

REMAINING

REMOTE CTRL

REC LED
86
Using the Menu
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or "Memory Stick Duo" in your camcorder on your computer. For
details, refer to the "Computer Applications Guide."
GSTD-USB
Select to view the picture on the "Memory Stick Duo."
PictBridge Select to connect the PictBridge compliant printer (p. 109).
USB STREAM
Select to view the picture on the tape.
GOFF
Select not to display date, time and the camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 57).
CAMERA DATA
Select to display the camera settings data during playback (p. 57).
GAUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch
ON
Select to always display the remaining tape indicator.
GON
Select when using the Remote Commander supplied with your
camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
GON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
(play/pause).