Advertisement
DSC Impassa Quick Guide
For more information on this topic please visit the complete
Reset
To clear the display after an alarm event, first press [*] + [3] to view the event.
To clear the event history, arm, and then disarm your system with your [security code].
To clear the display after a fire alarm, press [*] + [7] + [2], or Arm then Disarm.
Trouble Condition alarms will clear from the display when the condition no longer exists.
Security Codes
You can program up to 16 additional user codes and attributes. Additional users will be restricted to
arming and disarming functions, while the Master user code can perform all functions.
To change the Master Code, press [*][5][Current Master Code][40][New 4 or 6 digit Master Code]
[#].
To program a new user:
1. Press [*] + [5] + [Master Code].
2. Enter the two-digit user number/slot to be programmed (01-16), or use the [<][>] to find
the desired user number/slot and press [*] to select.
3. Enter the new user's new 4 or 6 digit access code.
4. Continue adding additional user codes or press [#] to exit.
To erase an access code, press [*][5][Master Code][2-digit user number/slot (01-16)][*][#].
User Attributes
To assign additional attributes to a user code:
1. Press [*][5][Master or Supervisor][9]
2. Enter the [2=digit user number/slot] OR use [<][>] to find the desired user number/slot
and press [*] to select.
3. Use [<][>] to scroll to the attribute you want to program and press [*] to toggle on/off OR
enter [Attribute Number] to toggle on/off.
Some user numbers have been pre-programmed:
Attribute Explanation
Supervisor Similar to Master Code.
Secretly notifies the monitoring center of duress. Intended for use only when
Duress
you are forced to arm or disarm the system against your will.
https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]
DSC Impassa
manual.
Attribute
Number
[1]
[2]
Advertisement
