ADT DSC Impassa Quick Manual

Table of Contents

Download this manual

Quick Guide:

For a detailed review of the entire system, please view the

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY] or enter



your [security code] + [*] + [0] to Quick Arm.

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +



[security code].

Disarm:

To disarm, enter your [security code].



The DSC Impassa operates on the



Loss of AC power and use of backup battery power is indicated by Loss of AC Power.



DSC Impassa

mAh battery.

3600

DSC Impassa system manual.

Table of Contents

Do you have a question about the DSC Impassa and is the answer not in the manual?

Page 1  [security code]. Disarm: To disarm, enter your [security code].  Battery The DSC Impassa operates on the mAh battery.  3600 Loss of AC power and use of backup battery power is indicated by Loss of AC Power. ...
Page 2 A low battery condition is indicated by Service Required.  Bypassing Protected Areas Bypassing a zone allows you to arm your system with certain protected areas intentionally left unarmed or to access a protected area when the system is armed. To bypass a zone, press [*] to enter the function menu.
Page 3 Users can also be assigned attributes, like the Bell Squawk Attribute, for example, which generates a sound when that user arms and disarms the system. For a complete list of User Code Attributes please see the DSC Impassa system manual.
Page 4 To silence the Trouble Condition beeps, press [#].  For a list of possible Trouble Conditions, please see the DSC Impassa system manual. Volume The buzzer provides audible confirmation that a command to the panel has been executed. The buzzer has 21 different levels of volume.