ADT DSC Impassa Quick Manual

Download this manual

DSC Impassa Quick Guide

Help Center

DSC Impassa - Quick Guide

For a detailed review of the entire system, please view the

Arm &

Battery

Disarm the

System

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY].

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +

[security code].

To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +

[9] + [Master Code] + [4].

Disarm:

https://alpha.adt.com/help/15.html[11/8/2018 11:25:05 PM]

Bypass

Date &

Protected

Time

Areas

Settings

Select

Chimes &

Reset

Beeps

DSC Impassa

manual.

Security

Trouble

Codes

Conditions

Volume

Page 1 DSC Impassa Quick Guide Select « Help Center DSC Impassa - Quick Guide For a detailed review of the entire system, please view the DSC Impassa manual. Arm & Battery Bypass Date & Chimes & Reset Security Trouble Volume Disarm the...
Page 2 Battery The DSC Impassa operates on a 7.2V 3.6Ah battery which is only available through select retailers. We recommend searching online or calling ahead to your local battery dealer to confirm availability. Loss of AC power and use of backup battery power is indicated by "Loss of AC Power."...
Page 3: Security Codes
DSC Impassa Quick Guide For more information on this topic please visit the complete DSC Impassa manual. Reset To clear the display after an alarm event, first press [*] + [3] to view the event. To clear the event history, arm, and then disarm your system with your [security code].
Page 4: Trouble Conditions
DSC Impassa Quick Guide Zone Can manually bypass zones and arm/disarm the system. Bypassing Onetime Can disarm the system once per day. Reset daily at midnight. User Code For a complete list of User Code Attributes please see the DSC Impassa manual.