ADT DSC 9047 Quick Manual

Quick Guide:
For a detailed review of the entire system, please view the

Arm and Disarm

Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key

for two seconds, or enter your [security code] and exit before the exit delay expires.
To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for

two seconds, or enter your [security code] and do not leave the premises.
Disarm:
To disarm, enter your [security code] before the entry delay expires.


Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our

DSC 9047
DSC 9047 system
Battery Replacement Page.
manual.