Removing And Installing The Ws-F6K-Fe48X2-Af Inline-Power Daughter Card - Cisco WS-F6K-VPWR-GE Installation Notes

Removing and Installing the WS-F6K-FE48X2-AF Inline-Power
Daughter Card
The WS-F6K-FE48X2-AF inline-power daughter card is supported only on the WS-X6148X2-RJ-45
Ethernet module.
The WS-F6K-FE48X2-AF inline-power daughter card supports both IEEE 802.3af and the Cisco
Note
prestandard.
Removing the WS-F6K-FE48X2-AF Inline-Power Daughter Card
To remove the WS-F6K-FE48X2-AF inline-power daughter card on the module, perform these steps:
Loosen and remove the 10 screws and the 2 nuts securing the inline-power daughter card to the module.
Step 1
(See
Figure 21
78-10826-08
Figure 21.)
Removing the Inline-Power Daughter Card Mounting Screws (WS-F6K-FE48X2-AF)
Screw
Nut
Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note

Removing and Installing the WS-F6K-FE48X2-AF Inline-Power Daughter Card

29