Attach the inline-power daughter card to the Ethernet module with the nine screws and the three nuts.
Step 4
(See
Figure
Caution
Do not overtighten the screws and the nuts because you might damage the inline-power daughter card.
Figure 13
Step 5
You are now ready to install the Ethernet module back into the chassis. Go to the
Switching Module" section on page
78-10826-08
13.)
Attaching the Inline-Power Daughter Card to the Module (WS-F6K-VPWR-GE)
Screw
Nut
Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note
Removing and Installing the WS-F6K-VPWR-GE Inline-Power Daughter Card
39.
"Installing the Ethernet
23