Getting Started; Introduction To Example; Instructive, Interactive Animation Files - Siemens SIMATIC S7 Functional Safety Manual

Getting started

2.1

Introduction to example

2.1.1

Instructive, interactive animation files

The "Getting Started" chapter contains two animation files:
● "Procedure" (Page 28) shows a wiring overview of the S7-1200 Fail-Safe application
example.
● "Step 13: Downloading the complete safety program to the fail-safe CPU and activating
safety mode" (Page 61) shows the end result of the LAD programming ste
Nine animation videos take you step-by-step through many of the configuring and
programming tasks. These animation videos show the completed task at the beginning of the
video, with a fadeout to a step-by-step tutorial that demonstrates all of the required sub-
tasks. You can find animation videos at the following locations:
● "Step 1: Configuring the S7-1200 CPU 1214FC or CPU 1215FC" (Page 31)
● "Step 6: Creating an F-FB" (Page 51)
● "Step 7: Programming the safety door function" (Page 52)
● "Step 8: Programming the emergency stop function" (Page 54)
● "Step 9: Programming the feedback monitoring" (Page 56)
● "Step 10: Programming the user acknowledgment for reintegration of the fail-safe SM"
(Page 58)
● "Step 11: Programming of the main safety block" (Page 59)
● "Step 12: Compiling the safety program" (Page 60)
● "Step 13: Downloading the complete safety program to the fail-safe CPU and activating
safety mode" (Page 61)
S7-1200 Functional Safety Manual
Manual, 02/2015, A5E03470344-AA
2
25