Align the Print Head
Align the Print Head for better print results.
This takes about 7 minutes.
Use a sheet of supplied speciality paper
(MP-101) for alignment.
Open the Paper Support
Move the Paper Guides
(A) and pull it out.
(B) to both edges.
Make sure that the
Output Tray Extension
(C) is extended.
Load a sheet of supplied speciality paper
(MP-101) in the Rear Tray (D).
Be sure to use the supplied speciality paper
(MP-101) for Automatic Print Head Alignment.
MP-101 cannot be fed from the Cassette. Load
it in the Rear Tray.
MP-101 has the front and back sides. Load it
with the whiter side facing up.
For details, refer to "7 Loading Paper" on page