Canon PIXMA MP630 Getting Started page 9

3
Ins tal l the I nk Tan k
Press the PUSH mark on the ink tank until it
clicks into place.
Make sure the Ink lamp lights red.
• Be sure to install it in a well-lit environment.
• Match the labels when installing.
4
Install all the other ink tanks in the same way.
Install all the ink tanks .
• Once you have installed the ink tanks , do not
remove them unnecessarily.
• Make sure all the Ink lamp lights red.
4
1 2 3 5
5
Close the Scanning Unit (Cover) .
• Wait until the screen above appears (about 6
minutes) and go to the next step.
• The machine may make some operating
noises when preparing to print. This is
normal operation.
• If an error message is displayed on the LCD ,
make sure that the Print Head and the ink tanks
are correctly installed.
6 7
7