Canon PIXMA MP630 Getting Started page 8

4
Install the Ink Tanks
• Do not handle the ink tanks roughly such as
applying them excessive pressure or dropping
them.
• If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
• Be sure to use the supplied ink tanks.

1
(1)
(2)
Pull the orange tape (1) in the
direction of the arrow to peel off the
protective film and remove the film
(2) completely.
2
(A)
While pressing down with your left thumb, twist off the
orange protective cap (A) located on the bottom of the ink
tank.
• Do not hold the sides of the ink tank; ink may splash.