Install The Printer Software; Align The Print Head - Canon Color Bubble Jet BJC-8200 Quick Start Manual

7

Install the Printer Software

Windows:
Make sure that the printer is con-
1
nected, then turn on the computer.
If you see the New Hardware Wizard,
2
insert the Canon Creative CD-ROM
into your CD-ROM drive and follow
the on-screen instructions. If you
do not see the New Hardware
Wizard, wait until Windows com-
pletes booting up. Then, insert the
CD-ROM into your CD-ROM drive.
3 If Setup does not start auto-
matically, click on the
button on the Windows taskbar
and choose Run. Type
(where "X" is the drive letter of
your CD-ROM drive). Click OK.
Follow the on-screen instructions
4
to complete installation.
Note: If you do not see the
screen shown above, eject the
CD-ROM and reinsert. Then
repeat the steps above.
Macintosh:
Make sure that the printer is con-
1
nected, then turn on the computer.
2 Double-click on the
Canon BJC-8200
3 Follow the on-screen instructions
to complete installation.
Start
X:\Setup
icon.
8

Align the Print Head

1 Place one sheet of High
Resolution Paper (included in
the box) in the sheet feeder.
Start the alignment procedure.
2
Windows:
a. Click the
point to Settings then
select Printers.
b. Right-click the
8200 icon and select Properties.
c. Click the
then click the
Alignment) icon.
Click!
Click!
Macintosh:
a. In the software application,
from the File menu, select
Page Setup.
b. Click the
c. Click the down-arrow to select
Test Print.
Start button,
Canon BJC-
Maintenance tab
(Print Head
Utilities button.