Overlaying Still Images On Movies On A Tape - Memory Mix - Sony Handycam DCR-PC350E Operation Manual

– [AE SHIFT] is anything other than 0
– [16:9 WIDE] mode
– Progressive recording mode
– Picture effect [PICT.EFFECT]
• When you are recording with [CINEMA EFECT],
you cannot switch over to any other types of Digital
effects.
• When you set [DELAY MOTION], the effect is
canceled during the zoom operation.
z Tip
• When the picture is played back on your TV with
[CINEMA EFECT], the images will appear the same
as images recorded with the [16:9 WIDE] format in
the [ON] mode. (p. 69).
• When using [DELAY MOTION], using a tripod to
steady the camcorder is recommended.
• You can create a picture with color and brightness
reversed or a picture that looks like a pastel drawing
while recording on a tape. For details, refer to
Picture effect ([PICT. EFFECT], p. 75).
Overlaying still images on movies
on a tape – MEMORY MIX
You can superimpose a still image you have
recorded on a "Memory Stick Duo" over the
movie you are currently recording on a tape.
You can then record the superimposed
pictures on a tape or a "Memory Stick Duo."
(You cannot superimpose a still image on a
tape which you have already finished
recording.)
[MTCAM LUMI.] (Memory Luminance
key)
You can swap the brighter (white) area of a still
image into a movie. To use this function, have a
still image of an illustration or title handwritten
on white paper recorded on a "Memory Stick
Duo" beforehand.
Movie
Still image
[CAMTM CHROMA] (Camera Chroma
key)
You can superimpose a movie on top of a still
image, such as an image which can be used as
46
Recording
background. Shoot the movie with the subject
against a blue background. Only the blue area of
the movie will be swapped with the still image.
Still image
Movie
Blue
[MTCAM CHROMA] (Memory Chroma
key)
You can have the movie swap into the blue area
of a still image such as an illustration or into a
frame with a blue area enclosed by the frame.
Movie
Still image
Blue
1
Check that you have a "Memory Stick
Duo" with the still image to be
superimposed and a tape (only if you
are recording on a tape) in your
camcorder.
2
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode
(when you are recording on a tape) or
the CAMERA-MEMORY mode
(when you are recording on a
"Memory Stick Duo").
3
Touch .
4
Touch [MEMORY MIX].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
APPLI.) menu.
(PICT.