Sony Handycam DCR-PC350E Operation Manual page 111

6
Select (STANDARD SET), then
[USB-PLY/EDT] by touching
and .
7
Select [PictBridge], then touch
8
Touch .
9
Connect the USB jack (p. 142) of your
Handycam Station to a printer using
the supplied USB cable, then set the
USB ON/OFF switch on the
Handycam Station to ON.
The location of the USB jack of the printer
differs depending on the model. Refer to the
operating instructions supplied with your
printer for details on operation.
10
Select (PICT. APPLI), then
[PRINT] by touching
When the connection between your
camcorder and printer is complete,
appears on the screen.
1 / 10
101
2016
PRINT
END
101-0001
+
- SET EXEC
One of the images stored on the "Memory
Stick Duo" will be displayed.
b Note
• We cannot guarantee the operation of models that
are not PictBridge compatible.
• You cannot connect your camcorder to the printer if
[USB-PLY/EDT] in the menu settings is not set to
[PictBridge]. Follow the instructions shown on the
screen.
/
.
/ and .
PictBridge
connecting
Printing
1
Select the image to be printed by
touching (previous image)/
(next image).
2
Touch , then [COPIES].
3
Select the number of copies to be
printed by touching
touch .
You can set a maximum of 20 copies of one
image to be printed.
4
Touch [END].
To print the date on the image
1
Touch , then [DATE/TIME].
2
Select [DATE] or [DAY & TIME] and
.
The default setting is [OFF].
5
Touch [EXEC].
A confirmation screen appears.
1 / 10
101
2016
PRINT
101-0001
Print this?
COPIES 1
DATE/TIME OFF
6
Touch [YES].
When printing is finished, [Printing...]
disappears and the image selection screen
appears again.
1 / 10
101
2016
PRINT
101-0001
Printing...
Keep USB cable connected.
CANCEL
/ , then
111
Dubbing/Editing