1
Attach the charged battery pack to the camcorder.
To charge the battery, see page 16.
a
Slide the BATT
lever in the direction of 1 and push
it down in the direction of 2.
Remove the battery terminal cover
when it lifts up in the direction of 3.
BATT
2
Insert a cassette into the camcorder.
a
Slide the OPEN/
EJECT
lever in the
direction of the arrow
to open the lid.
The cassette compartment
automatically comes out
and opens up.
OPEN/EJECT
10
Quick Start Guide
Quick Start Guide
Recording movies
(battery release)
(battery release) lever
b
Insert the cassette with
its window-side facing
up, then push the center
of the back of the
cassette.
lever
b
Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
c
Window-side
Press
.
Close the cassette lid after
the cassette compartment
slides back in by itself.