Recording A Still Image - Sony DCR-HC85 Marketing Operation Manual

3
Slide the POWER switch until the
CAMERA-TAPE lamp lights up.
4
Press EASY.
The EASY lights up in blue.
Easy Handycam
operation
ON
5
Press REC START/STOP.
Recording starts. [REC] appears on the
LCD screen and the Camera recording lamp
lights up. Press REC START/STOP again
to stop recording.
To turn the power off
Slide the POWER switch up to the OFF (CHG)
position.
To cancel Easy Handycam operation
Press EASY again.
b Note
• You cannot turn Easy Handycam operation on or off
during:
– Recording
– USB Streaming
• During Easy Handycam operation, the following
buttons are not available.
– LCD BACKLIGHT (p. 18)
– BACK LIGHT (p. 37)
• During Easy Handycam operation, the settings of the
functions that are not displayed on the screen return
to their defaults. Previously made settings are
restored when you cancel Easy Handycam
operation.
Slide the POWER
switch while pressing
the green button.

Recording a still image

1
Remove the lens cap. Pull the lens cap
string down and attach it to the grip
belt.
2
Press OPEN and open the LCD panel.
3
Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
4
Press EASY.
The EASY lights up in blue.
5
Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
The indicator
stops flashing.
The number of images
that can be recorded.*
60min
*The number of images that can be recorded
varies depending on the image quality setting
and the recording environment.
Slide the POWER
switch while pressing
the green button.
8
MENU
,continued
35
Recording