Using the
(MEMORY SET) menu
– BURST/QUALITY/IMAGE SIZE/ALL
ERASE/NEW FOLDER, etc.
You can select items listed below on the
MEMORY SET menu. To select items, see
"Selecting menu items" (p. 62).
The default settings are marked with G. The
indicators in parentheses appear when the
STILL SET
BURST
70
Using the Menu
You can record several still images one after another. The number of images you
can record changes with the image size and space available on the "Memory Stick
Duo" you are using.
1
Select [NORMAL], [HIGH SPEED] (DCR-HC85) or [EXP. BRKTG],
and then touch
GOFF
NORMAL (
)
HIGH SPEED
(
)
EXP. BRKTG
(
)
2
Touch
.
3
Press PHOTO fully.
In the [NORMAL] or [HIGH SPEED] (DCR-HC85) setting, the maximum
number of images are recorded as long as you are pressing PHOTO fully.
Note
b
• The flash (built-in or optional) will not function while you are recording images
continuously.
• The maximum number of images will be recorded in the self-timer mode or when you are
operating with the Remote Commander.
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
currently operate. Unavailable items will be
grayed out.
60min
MEMORY SET
STILL SET
MOVIE SET
.
Select when not recording continuously.
For DCR-HC65:
Select to record from 4 (1152 × 864 image size) to 13 (640 × 480
image size) images continuously at approximately 0.5-second
intervals.
For DCR-HC85:
Select to record from 4 (1600 × 1200 image size) to 25 (640 × 480
image size) images continuously at approximately 0.5-second
intervals.
For DCR-HC85:
Select to record up to 32 images (640 × 480 image size)
continuously at approximately 0.07-second intervals.
Select to record 3 images consecutively with different exposures
at approximately 0.5-second intervals. You can compare the 3
images and select an image recorded in the best exposure.
8
FINE
1600
FORMAT
OK