Sony DCR-HC85 Marketing Operation Manual page 119

Symptom
Cannot delete all pictures at once.
Image protection cannot be applied.
Cannot mark pictures for print.
The data file name is not indicated
correctly.
The data file name flashes.
Dubbing/Editing
Symptom
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
Cannot dub correctly using the A/V
connecting cable.
Pictures from connected devices are
not displayed correctly.
New sound added to a recorded tape
is not heard.
Cause and/or Corrective Actions
cWhen you are using the "Memory Stick Duo" with the write-protect tab,
release the lock on the write-protect tab of the "Memory Stick Duo."
(p. 128)
cCancel image protection on the picture. (p. 108)
cWhen you are using the "Memory Stick Duo" with the write-protect tab,
release the lock on the write-protect tab of the "Memory Stick Duo."
(p. 128)
cPerform the operation again on the index screen. (p. 108)
cWhen you are using the "Memory Stick Duo" with the write-protect tab,
release the lock on the write-protect tab of the "Memory Stick Duo."
(p. 128)
cPerform the operation again on the index screen. (p. 109)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
• Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 127)
• The file is damaged.
• The file format is not supported on your camcorder. (p. 127)
Cause and/or Corrective Actions
• Cannot change the setting of the AUDIO/VIDEO jack during Easy
Handycam operation.
cCancel Easy Handycam operation (p. 54), and then set [VIDEO
INPUT] to the appropriate signal in the
menu. (p. 86)
cSet [VIDEO INPUT] to the appropriate signal in the
SET) menu. (p. 86)
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 88)
cSet [VIDEO INPUT] to the appropriate signal in the
SET) menu. (p. 86)
cSet [DISPLAY] to [LCD PANEL] in the
menu. (p. 88)
• The A/V connecting cable is not connected properly.
cMake sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
• The input signal is not NTSC. (p. 95)
cIn the
(STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1] (original sound) side until the sound is heard appropriately. (p. 85)
(STANDARD SET)
(STANDARD
(STANDARD SET)
(STANDARD
(STANDARD SET)
,continued
119
Troubleshooting