Output From Inverter To Master Module - Mitsubishi Electric FR-A5NPA Instruction Manual

4.1.2 Output from inverter to master module

(1) Monitor function
You can monitor the following items from the master module.
1) Running frequency :0.01Hz increments (FR-A500/F500 series)
Running speed
2) Alarm definition : Refer to page 51 for the FR-A500/F500 series
3) Special monitoring: Monitor data set by the real time monitor (P1.1
4) Inverter status
Inverter output signal can be monitored by the PNU. (Refer to pages
38, 45.)
FR-A500/F500 series
Output Definition (Signal)
Inverter running (RUN)
Forward running
Reverse running
Up to frequency (SU)
Overload alarm (OL)
Instantaneous power failure or
under voltage (IPF)
Frequency detection (FU)
Alarm output (ABC)
(2) Parameter read
You can read a function to the master module. (Refer to pages 35, 42.)
Refer to the inverter manual for parameter details.
(Refer to page 38.)
: 1r/min increments (FR-V500 series) (Refer to
page 45.)
and page 61 for the FR-V500 series.
to P1.37). Refer to page 48 for the FR-A500/
F500 series and page 57 for the FR-V500
series.
Inverter running (RUN)
Forward running
Reverse running
Up to speed (SU)
Overload alarm (OL)
Instantaneous power failure or
under voltage (IPF)
Speed detection (FB)
Alarm output (ABC)
27
FUNCTION OVERVIEW
FR-V500 series
Output Definition (Signal)