Table of Contents
Advertisement
INVERTER SETTING
REMARKS
1. The Pr. 340 value may be changed from the PU in any operation mode.
2. Computer programming, which has stopped due to an instantaneous power
failure or like during network operation, remains stopped even if power is
recovered.
3. When Pr. 340 = "2":
When a start command is given from the network with restart enabled (Pr. 57
≠
9999), a start command during power off (including instantaneous power
failure and power failure) is stored. Therefore, the inverter resumes operation
in the state before powering off at powering on again (power restoration).
14
Advertisement
Table of Contents
