EJU31270
Steering pole
The steering pole varies in height with the op-
erator's posture, enabling the operator to as-
sume various riding positions.
When removing the hood for pre-operation
checks, maintenance, etc., lift the steering
pole and use the lock pin to support it. Move
the lock pin into the detent. Make sure that the
lock pin is returned to the stowed position af-
ter installing the hood.
1 Steering pole
2 Lock pin
EJU36000
Bow rope hole
The bow rope hole is located at the bow of the
watercraft.
Features and functions
The bow rope hole is used to attach a rope to
the watercraft when transporting, mooring, or
towing it in an emergency.
1 Bow rope hole
EJU36010
Stern rope hole
The stern rope hole is located at the stern of
the watercraft.
The stern rope hole is used to attach a rope to
the watercraft when mooring it.
1 Stern rope hole
EJU31661
Engine overheat warning system
This model is equipped with an engine over-
heat warning system.
If the engine starts to overheat, the engine
speed will be limited to about 3400 r/min.
If this occurs, immediately reduce the engine
speed, return to shore, and then check for wa-
ter discharge at the cooling water pilot outlet
while the engine is running. If there is no dis-
charge of water, check the intake grate and
22