Fan Wheel Removal; Figure 010-11: Silicone Seal; Figure 010-12: Front Lugs - Miele DG 408 Series Technical Information

Technical Information

Figure 010-11: Silicone Seal

11. Slide the upper duct assembly back to release the front lugs from the
frame (Figure 010-12). Lift the assembly upward to remove.

Figure 010-12: Front Lugs

Warning!
When re-installing the upper air duct, the silicone has to be replaced to seal
the air duct.
The front lugs on the upper air duct are fragile and break off easily!
4.7

Fan Wheel Removal

1. Take the steam generator and equipment out of the oven cavity.
2. Uninstall the appliance. See Section 010-4.1.
3. Remove the side panels. See Section 010-4.2.
4. Remove the rear panel. See Section 010-4.3.
5. Remove the upper air duct; see Section 010-4.6.
6. Remove the C-clip (Figure 010-6, Item 2).
7. Remove the fan wheel.
20
DG 408x Steam Ovens