Service; Removing The Appliance From Its Niche; Removing The Side Panels; Figure 010-2: Screws On The Bottom Of The Appliance (Dg 4080) - Miele DG 408 Series Technical Information

DG 408x Steam Ovens

Figure 010-2: Screws on the Bottom of the Appliance (DG 4080)

4

Service

4.1

Removing the Appliance from its Niche

1. Open the door.
2. Take the steam generator and equipment out of the oven cavity.
3. Remove the appliance retaining screws (Figure 010-3, Item 1).
4. Slide the appliance out of its niche.
5. Disconnect the appliance from the power supply.

Figure 010-3: Appliance Retaining Screws

4.2

Removing the Side Panels

1. Uninstall the appliance. See Section 010-4.1.
2. Remove the side panel screws; see Figure 010-4, Item 1.
3. Take off the side panel(s).
15
Technical Information