Miele H 7660 BP Operating And Installation Instructions page 28

Features
FlexiClip runners HFC 72
You can use the FlexiClip runners on
shelf levels 1–4.
Push the FlexiClip runners right into
the oven compartment before placing
accessories on them.
The accessories will then
automatically sit securely in between
the stoppers at either end of each
runner and be prevented from sliding
off.
The FlexiClip runners can support a
maximum load of 15 kg.
28
Fitting and removing FlexiClip
runners

Danger of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, oven compartment
or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before fitting or removing the
FlexiClip runners.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
should be fitted on the right.
When fitting or removing the FlexiClip
runners, do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a shelf level
(1.) and then push it along the rail into
the oven compartment (2.).