Related Manuals for Cisco FM TUBE
Summary of Contents for Cisco FM TUBE
- Page 1 Cisco Ultra-Reliable Wireless Backhaul FM TUBE Installation and Configuration Manual (Formerly Fluidmesh) Edition 1.0 (For FM-TUBE antennas)
- Page 2 Copyright © Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third -party trademarks mentioned are the property of their respective owners. The use of the word 'partner' does not imply a partnership relationship between Cisco and any other company.
-
Page 3: Table Of Contents
7.11. Limitation Of Liability ................20 7.12. Exclusion Of Liability For Emergency Services ........21 7.13. Export Control ..................21 7.14. General ....................22 8. Contact Us ....................23 © 2021 Cisco and/or its affiliates. All rights reserved. Page 3 of 23... -
Page 4: Hazardous Condition Warnings
© 2021 Cisco and/or its affiliates. All rights reserved. Page 4 of 23... -
Page 5: Radio-Frequency Transmission Hazard
RF exposure. Make sure that all RF feeds are securely connected to an appropriate antenna. Never activate any RF-capable device that is not connected to an antenna. © 2021 Cisco and/or its affiliates. All rights reserved. Page 5 of 23... -
Page 6: Reporting Mistakes And Recommending Improvements
If you find any mistakes, or if you know of a way to improve the procedures that are given, please let us know by E-mailing your suggestions to documentation@fluidmesh.com. © 2021 Cisco and/or its affiliates. All rights reserved. Page 6 of 23... -
Page 7: Introduction
The TUBE antenna includes an integral mounting bracket, and is suited for direct mounting to walls. © 2021 Cisco and/or its affiliates. All rights reserved. Page 7 of 23... -
Page 8: Installation
• If applicable, avoid installing antennas inside audio loudspeaker enclosures. The proximity of a radio antenna to the metal in © 2021 Cisco and/or its affiliates. All rights reserved. Page 8 of 23... -
Page 9: Contents Of The Kit
If the antenna must be installed in an laterally offset position from the center line of the train tracks, the maximum permitted offset is 50 ft. (15m) (below). © 2021 Cisco and/or its affiliates. All rights reserved. Page 9 of 23... - Page 10 (1.83m) above the mounting point of the train antennas (below). • The co-axial cables that are used to connect the TUBE antenna to the radio must be less than 3 ft. (1m) long. © 2021 Cisco and/or its affiliates. All rights reserved. Page 10 of 23...
- Page 11 Remove the plastic caps from the cable connectors on the underside of the antenna (blue highlights, above). Connect the N-male terminals on the antenna cables (below) to the correct cable connectors on the antenna. © 2021 Cisco and/or its affiliates. All rights reserved. Page 11 of 23...
- Page 12 Installation CAUTION When connecting the antenna cables to the antenna, always seal the connections using self-shrinking outdoor-rated tape. © 2021 Cisco and/or its affiliates. All rights reserved. Page 12 of 23...
-
Page 13: Specifications
Table 1. TUBE specifications Dimensions (in Mass Working Gain Polarization millimetres) frequency range 40 x 40 x 284 4900 MHz to 14.6 Dual port, dual TUBE 5900 MHz orthogonal © 2021 Cisco and/or its affiliates. All rights reserved. Page 13 of 23... -
Page 14: Notices And Copyright
Cisco Systems. Cisco and/or its affiliates provides no warranty with regard to this manual, software or other information contained herein, and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to this manual, the software or such other ©... - Page 15 Notices and copyright information. In no event shall Cisco Systems be held liable for any incidental, consequential or special damages, whether based on tort, contract or otherwise, arising out of or in connection with this manual, the software or other information contained herein, or use thereof.
-
Page 16: Fluidmesh End-User License Agreement
Agreement, will be prosecuted to the maximum extent allowable under law. 7.2. Notice This is an agreement between you and Fluidmesh, a division of Cisco (hereafter known as 'Fluidmesh'). You must read and agree to the terms of this firmware license agreement (hereafter known as the 'agreement') before any Fluidmesh firmware can be downloaded, installed or used. -
Page 17: License Grant
Fluidmesh. (f) remove any Cisco or Fluidmesh copyright notice, or Cisco or Fluidmesh branding from the Fluidmesh Firmware or modify any user interface of the Fluidmesh Firmware or Fluidmesh Device. -
Page 18: Open-Source Software
This license will continue until terminated. Unauthorized copying of the Fluidmesh Firmware or failure to comply with the above restrictions will result in automatic termination of this Agreement and will make other legal © 2021 Cisco and/or its affiliates. All rights reserved. Page 18 of 23... -
Page 19: Feedback
© 2021 Cisco and/or its affiliates. All rights reserved. Page 19 of 23... -
Page 20: Warranty Disclaimer
In no event shall Fluidmesh's or its suppliers' or its resellers’ liability exceed five hundred United States dollars (US$ 500). You acknowledge that this provision reflects a reasonable allocation of risk. © 2021 Cisco and/or its affiliates. All rights reserved. Page 20 of 23... -
Page 21: Exclusion Of Liability For Emergency Services
(including obtaining any necessary export license or other governmental approval), prior to operating the Fluidmesh Devices and © 2021 Cisco and/or its affiliates. All rights reserved. Page 21 of 23... -
Page 22: General
DFAR Section 227.7015(b). Fluidmesh is a trademark of Cisco Systems in the United States and worldwide. © 2021 Cisco and/or its affiliates. All rights reserved. -
Page 23: Contact Us
Tel. +44 2078 553 132 Regional headquarters for France: Tel. +33 1 82 88 33 6 Regional headquarters for Australia and New Zealand: Tel: +61 401 747 403 © 2021 Cisco and/or its affiliates. All rights reserved. Page 23 of 23...