7.18. Removal of the Plasma Panel
1. Disconnect the couplers(PB31, PB32, PB33, PB34, PB35,
PB37, PB38).
2. Remove the each 4 screws and then remove the Fan
Blocks(A, B, C, D).
3. Remove the each 2 screws and then remove the
Reinforcement Angles (L, R).
4. Remove the each 2 screws and then remove the
Connection Plate (A, B, C, D).
5. Remove of the Slot Block.
(Reference to Removal of the Slot Block).
6. Disconnect the couplers(D20, D25, PB30).
7. Remove the flexible cables from the couplers(D31, D32,
D33, D34).
8. Remove the 7 screws and then remove the PB-Board Block
and D-Board.
9. Disconnect the couplers(P2, P9, P11, P12, P23).
10. Remove the 8 screws and then remove the P-Board.
11. Remove the each 2 screws and then remove the Speaker
Terminal Blocks (L, R).
12. Disconnect the couplers(SC45, SC46).
13. Remove the each 4 screws and then slide the SU-Board
and the SD-Board to the left (arrow 1).
14. Remove the flexible cables from the couplers(SU1, SU2,
SU3, SU4, SD1, SD2, SD3, SD4) and then remove the SU-
Board and the SD-Board.
21
TH-65PHD8BK / TH-65PHD8EK / TH-65PHD8UK