Panasonic TH-65PHD8BK Service Manual page 40

TH-65PHD8BK / TH-65PHD8EK / TH-65PHD8UK
GPH8D chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful for
special function required customers. This should be set at the installation stage.
Option menus
Off-timer function
Onscreen display
Initial INPUT
Initial VOL level
Maximum VOL Level
INPUT lock
Studio W/B
Advanced PIP
Display size
Button lock
Remocon User Level
ID select
Remote ID
Serial ID
Slot power
V. Installation
Rotate
Note :
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "RemoteID"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the "Volume down" button on main unit together with "R" button on the remote control and hold for more than 5 seconds.
The "SHIPPING" menu is displayed and the lock is released when it disappears.
Option Menu for GPH8D series
default setting
Enable Off-timer operation Enable/Disable.
On Enable/Disable to display input mode indication after power on and no signal
indication.
Off Sets the initial input mode when the power is turned on. Allow input mode
selection while power is on.
Off Sets the initial volume level when the power is turned on. Allow Volume
control while power is on.
Off Sets the maximum volume to desired level. Volume cannot exceed this level.
Off Fixes the input mode to AV, Component/RGB or PC. Can not change input
mode by input selection key.
Off Set warm mode color temperature to 3,200 Kelvin.
Off Off : Sets normal two screen display mode.
On : Sets Advanced PIP mode.
Off Adjusts the image display size on screen.
On : Sets the image display size approximately 95% of the normal image
display.
Off Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume
up/down)
Off Remote key invalidation.
Off : Valid key is all key of remote.
User1 : Valid key are only Stand-by (ON/OFF), Input, Direct input, Status,
Surround, Sound mute On/Off, and volume adjustment.
User2 : Valid key is only Stand-by (ON/OFF).
User3 : All keys are null and void
0 Set ID number from 0 to 100.
Off Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)
Off Serial ID function On/Off
Off Sets the slot power mode while the power is turned on.
Allow Optional Terminal Board insert Slots while power is on.
Off V. Installation function On/Off
This mode is available for TH-65PHD8BK/EK/UK.
Note: Turn up the power switch for the upward direction when you set display
vertically.
Off The image rotates 180 degrees (up-down)
40
Contents