TH-65PHD8BK / TH-65PHD8EK / TH-65PHD8UK
7.8.2.
Removal of the P(P-2)-Board
1. Disconnect the couplers(CN05, CN06, CN08).
2. Remove the 5 screws.(Top view)
3. Remove the 8 screws.(Bottom view)
4. Remove the P(P-2)-Board from the 6 molding props.
Note:
· When assembling the P(P-1)-Board and the P(P-2)-
Board, the position of each hole of the insulation
sheets(A, B, C, D) is set to the position of each hole of
the P(P-1)-Board and the P(P-2)-Board and then
assemble them. (
14
marks indicate setting positions.)