Advertisement
Reflector
0 Degrees Elevation
(Next Mark Indicates 5
0
)
FIGURE 1
Reflector Support
Post
Use Front of Slide
Bracket for Proper
Degree of Elevation
Required. Unit shown
o
at 60
.
FIGURE 2
FIGURE 3
TOP VIEW
Point Towards Satellite
RETURNING ANTENNA TO TRAVEL POSITION
STEP 1. Turn receiver and TV OFF.
STEP 2. Disconnect coax from receiver.
STEP 3. Loosen clamp knobs and put antenna in travel
position. See Figure 3.
STEP 4. Coil coax under base. See Figure 4.
NOTE: The carton the system came in is designed
to be reused. It is suggested that you store your
system in it when not in use.
NOTE: When ready to use antenna again, you must
uncoil the coax before raising antenna. The antenna
will not raise if the coax is coiled up under the base.
FIGURE 4
LNBF
Clamp Knobs
Use Front of Slide
Bracket for Proper
Degree of Elevation
Required. Unit shown
o
at 50
.
Coil Coax
Around
Clips
Advertisement
