Connecting; Connecting An External Video Monitor; Using An I.link Connection - Sony CINEALTA PDW-F330K Operating Instructions Manual

Connecting

Note
Some of the peripheral devices and related products
referred to in this section may be no longer in production.
When selecting the devices, consult your Sony dealer.
Connecting an External Video
Monitor
When using a Sony liquid crystal display monitor, make
the connections as follows.
F330
to VIDEO OUT
connector
1 Component video cable
2 75" coaxial
cable
to RGB/COMPONENT
input connector
to LINE A/B input connector
a To check an analog HD/SD (NTSC/PAL) signal
Connect the VIDEO OUT Y/P
and the RGB/COMPONENT input connectors of the
LMD-9030 liquid crystal display monitor with a
component video cable (not supplied).
The signal output from the VIDEO OUT Y/P
connectors can be switched with "COMPONENT OUT"
on the OUTPUT page of the OPERATION menu. For more
details, see page 114.
Note
It is not possible to add text information or markers to the
HD output.
b To check an SD (NTSC/PAL) signal
Connect the VIDEO OUT connector of this unit and the
LINE A or LINE B input connector of the LMD-9030
PDW-F330
to VIDEO OUT Y/P /P connector
B R
LMD-9030 liquid crystal
display monitor
/P connectors of this unit
B R
/P
B R
liquid crystal display monitor with a 75" coaxial cable
(not supplied).
F350
PDW-F350
to HDSDI OUT
connector
to VIDEO OUT connector
2 75" coaxial cable
1 75" coaxial
cable
to LINE A/B input
connector
to SDI input connector
a To check an HDSDI signal
Connect the HDSDI OUT connector of this unit and the
SDI input connector of the LMD-9050 liquid crystal
display monitor with a 75" coaxial cable (not supplied).
Note that regardless of the recording format (MPEG HD/
DVCAM), during recording or while recording is stopped
an HD signal is output.
Notes
• When playing back video recorded in SD format
(DVCAM format), no signal is output from the HDSDI
OUT connector.
• Text information and markers cannot be superimposed
on the HDSDI output.
b To check an SD (NTSC/PAL) signal
Connect the VIDEO OUT connector of this unit and the
LINE A or LINE B input connector of the LMD-9050
liquid crystal display monitor with a 75" coaxial cable
(not supplied).
The items displayed on a monitor are same as the ones on
the viewfinder screen. For details, see "Status Display on
the Viewfinder Screen" on page 31.

Using an i.LINK Connection

Using the (i.LINK) DV OUT S400 connector, you can
connect external equipment to the camcorder.
Video recorded in the MPEG HD format is down-
converted to the DVCAM format and output from the
(i.LINK) DV OUT S400 connector.
LMD-9050
liquid crystal display monitor
Connecting
51