Sony CINEALTA PDW-F330K Operating Instructions Manual page 157

Notes
• Directories cannot be created in the Clip directory.
• When the following operations, supported by version 1.5
and higher XDCAM devices, are carried out on a disc,
then it becomes impossible for version 1.4 and lower
XDCAM devices to record new clips or delete existing
clips on that disc. (The only possible operations are
playback and disc formatting.)
- Writing of clips with user-defined names
Edit directory
File name Content
Clip list file
a)
E*E01.SMI
*: 0001 to 0099
Metadata file generated
a)
E*M01.XML
automatically when E*E01.SMI
file is created.
*: 0001 to 0099
Other files Files other than the above
a) With firmware version 1.5 and higher, the "E*" part can be changed to a
user-defined name.
b) Only files which can be written by XDCAM. Partial writing is not
possible.
c) Possible with firmware version 1.5 and higher.
d) Only files which can be written by XDCAM
e) Only when the Write Inhibit tab on the disc is set to enable recording.
f) With firmware version 1.5 and higher, when the "E*" part of a *E01.SMI
is changed, an E*M01.XML file with the same name in the "E*" part is
also changed automatically.
Sub directory
File name Content
Proxy AV data (MXF) file
a)
C*S01.MXF
generated automatically when
a C*.MXF file is created.
*: 0001 to 4999
Other files Files other than the above
a) With firmware version 1.5 and higher, the "C*" part can be changed to any
name.
b) With firmware version 1.5 and higher, when the "C*" part of a C*.MXF
file name is changed, a C*S01. MXF file with the same name in the "C*"
part is generated automatically.
c) When a C*.MXF file is created, a C*S01.XML file with the same name in
the "C*" part is generated automatically.
General directory
File name Content
Any file –
- Deletion of clips (except the last recorded clip)
- Locking of clips
• If you attempt to write a C*.MXF file which does not
meet the conditions specified as remark c) on this table
via a FAM connection, a Windows error message
appears to the effect that the file or directory is corrupt
and cannot be read.
Operations
Read/Partial read Write/Partial write Rename
Yes
b)
Yes
Yes
b)
Yes
– No
g) When an E*E01.SMI file is created, an E*M01.XML file with the same
name in the "E*" part is also generated automatically.
h) When an E*E01.SMI file is deleted, an E*M01.XML file with the same
name in the "E*" part is also deleted automatically.
Note
Directories cannot be created in the Edit directory.
Operations
Read/Partial read Write/Partial write Rename
Yes No
– No
d) When a C*.MXF file is deleted, the C*S01.XML file with the same name
in the "C*" part is also deleted automatically.
Note
Directories cannot be created in the Sub directory.
Operations
Read/Partial read Write/Partial write Rename
Yes Yes
Create Delete
c) d) e)
No Yes Yes
f) g) h)
No No No
– No –
Create Delete
b) c) d)
No No No
– No –
Create Delete
a) Yes b)
Yes Yes
Overview
157