Sony CINEALTA PDW-F330K Operating Instructions Manual page 166

Status WARNING
display on indicator
the LCD
monitor/
viewfinder
screen
Warning
: Continuous
indication
: 1 flash/s
: 4 flashes/s
High TEMP!
ACC Sensor!
Skew Sensor
1) Asterisks (*) are replaced by digits in the display.
2) During recording
3) During playback, fast forward, fast reverse, or stop
4) During recording pause
Operation/alarm messages
An operation or alarm message is displayed in the
operation/alarm message display area (see page 32) of the
viewfinder screen.
Operation/alarm
message
INTERVAL **M**S
LOW LIGHT
HIGH TEMPERATURE Indicates that temperatures have
A message for VDR operation is displayed in the setting
change and adjustment progress message display area of
the viewfinder screen (see page 32).
Message
ILL. Disc!
ILL. Index!
No FS!
Unknown FS!
No Support!
166
Operation Warnings
Warning Indicators in
sound the viewfinder
Continuous REC/
beep TALLY
1 beep/s
4 beeps/s
Meaning
Indicates the camera is in the
Interval Rec mode. **M**S
indicates the shooting interval.
Appears, depending on the
setting, to indicate the subject
illumination is inadequate.
risen inside the unit. Avoid
continued use in this state.
Meaning and action to take
The disc cannot be used by this
unit. Insert another Professional
Disc.
Index file or file system error.
Exchange or format the disc.
A recorded clip cannot be handled
by this unit. Exchange or format
the disc.
Problem
BATT
: Continuous
: 1 flash/s
: 4 flashes/s
– Internal
temperature
high.
– Internal drive
sensor error
5) During recording or pause
For details about the warning displays and alarm
messages on the viewfinder, see the next item.
Message
FORMAT NG!
Disc Damage
Non AV Full
MAX # Files
DI read err
Read err
DRV ADJ err
Run Salvage
Salvage NG
REC INHI.!
VDR operation Action to take
Operation Power the unit off
continues. and move it to a
cool place.
Operation Protect the unit
continues. from shock and
vibrations, turn off
the power, and
contact your Sony
dealer.
Meaning and action to take
The disc cannot be used by this
unit. Exchange the disc.
The disc cannot be recorded. To
record, exchange the disc.
The disc is full. Exchange or
format the disc.
The disc was not recognized. Try
ejecting the disc and inserting it
again. Or exchange the disc.
Salvage processing needs to be
done on the disc. To record on the
disc, eject the disc, insert it again,
and execute salvage processing.
Salvage processing failed. +,-$
.#/&01"2$"##$5]&7.107'$,N$P0"8"$
L3#7$F#8,-.07'$P,#"$U,/$\7.$
U,-9&11W$!C&1J&'#$+K78/0,7*:$,7$
%&'# )>.
The Write Inhibit tab of the disc is
in the recording disabled position,
or salvage processing needs to be
done on the loaded disc. Set the
tab to the recording enabled
position. Or eject the disc, insert it
again, and perform salvage
processing.