Table of Contents
Advertisement
Display indication
Meaning
Video with
When the MENU switch is flicked
superimposed
toward STATUS, the principal settings
information
of this unit appear as on the
viewfinder screen.
Video without
The video only appears.
superimposed
information
Status display
Counter indications, warnings, audio
levels, and similar information
appears. No video image appears.
If you press this button when the thumbnail screen is
displayed, the duration of the selected clip is divided into
12, and the first frame of each of the divisions is shown in
a further thumbnail display (expand function). Each time
you press the button, the division is repeated (to a
maximum of three times, with 1728 divisions). Hold down
the SHIFT button and press this button to step back
through the division process.
For details of the expand function, see page 85.
b COUNTER/CHAPTER (counter display toggle/
chapter) button
Each time this button is pressed, the counter display
section changes as follows. This setting is activated only
when the LCD monitor display is set to STATUS with the
DISPLAY/EXPAND button.
COUNTER: Displays the elapsed recording/playback
time.
TC: Displays timecode.
U-BIT: Displays user bits data.
If you press this button when the thumbnail screen is
displayed, those frames on which essence marks are
recorded appear in a list (chapter function). Press the
button once more to return to the normal thumbnail
display.
By displaying thumbnails with essence marks attached in
place of index frames, you can check the contents of clips
more easily and more quickly. This is also useful for
cueing up long clips.
For details of the chapter function, see page 85.
c RESET button
Resets the display of the time data when the LCD monitor
display is set to STATUS or CHAR with the DISPLAY/
EXPAND button. According to the settings of the
PRESET/REGEN/CLOCK switch (see page 22) and the
F-RUN/SET/R-RUN switch (see page 22), this button
resets the display as follows.
Settings of buttons and
switches
COUNTER/CHAPTER button:
COUNTER
To reset
Counter to 0:00:00:00
Settings of buttons and
switches
COUNTER/CHAPTER button:
TC
PRESET/REGEN/CLOCK
switch: PRESET
F-RUN/SET/R-RUN switch: SET
COUNTER/CHAPTER button:
U-BIT
PRESET/REGEN/CLOCK
switch: PRESET
F-RUN/SET/R-RUN switch: SET
a) Of the timecode bits for every frame recorded on the disc, those bits which
can be used to record useful information for the user such as scene number,
shooting place, etc.
b) Can only be reset when the display is set to STATUS. When it is set to
CHAR, resetting is not possible.
For details, see "Setting the Time Data" on page 66.
If you press this button when thumbnails of frames with
essence marks are displayed using the COUNTER/
CHAPTER button, or when thumbnails of clip divisions
are displayed using the DISPLAY/EXPAND button, then
the display returns to the normal thumbnail display.
d BRIGHT (brightness) button
Sets the backlight brightness. Each time you press this
button, the backlight brightness cycles through the
following four levels:
H: Select this to view the LCD monitor in outdoor
daylight.
M: Brightness level between H and L.
L: Select this to view the LCD monitor indoors or outside
at night.
OFF: Turn the backlight off (you can view video under
normal lighting). Select this in outdoor daylight when
the LCD monitor screen is subjected to direct
sunlight.
Status Display on the LCD Monitor
The following display appears when the LCD monitor
display is set to STATUS with the DISPLAY/EXPAND
button.
H D
S P
2 3 . 9 8 P
P B
N D F
E X T - L K
T C G
01 : 23 : 45 15
H
M I N
S E C
W A R N I N G : H U M I D
D I S C E
B A T T E
To reset
Timecode to 00:00:00:00
User bits data
a)
to 00 00
00 00
b)
O V E R
0
4 c h
H O L D
:
2
F R M
B
d B
1
ST
2
3
4
F
Li
P E U K
Location and Function of Parts
17
Hide quick links:
Advertisement
Table of Contents
