Setting The Status Display On The Viewfinder Screen And The Lcd Monitor; Selecting The Display Items - Sony CINEALTA PDW-F330K Operating Instructions Manual

?F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID : sssssssssssssssss
USER PRESET
CUSTOMIZE RESET :
2
Press the MENU knob, then select USER PRESET,
and press the MENU knob.
The message "PRESET OK? YES b NO" appears.
?F01 USER FILE
PRESET OK?
USER FILE LOAD
USER FILE SAVE
F.ID : sssssssssssssssss
USER PRESET
CUSTOMIZE RESET :
3
Select YES, and press the MENU knob.
The settings for all items in the USER menu are reset
to the standard settings.
136

Setting the Status Display on the Viewfinder Screen and the LCD Monitor

TOP
: EXEC
: EXEC
: EXEC
EXEC
TOP
YES NO
: EXEC
: EXEC
: EXEC
EXEC
Setting the Status Display
on the Viewfinder Screen
and the LCD Monitor
This section explains the menu settings for the display of
the viewfinder screen. These settings are also used for the
display of the LCD monitor in the same way.

Selecting the Display Items

To select the items to be displayed on the viewfinder
screen (with the viewfinder DISPLAY set to ON) and the
LCD monitor, use the VF DISP 1 and VF DISP 2 pages of
the OPERATION menu.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the VF DISP 1 or VF DISP 2 page of the
OPERATION menu, and press the MENU knob.
For details on menu operations, see "Basic Menu
Operations" on page 131.
2
Select the desired setting item, and press the MENU
knob.
On the VF DISP 1 and VF DISP 2 pages, you can
select the following items to be displayed on the
screen.
VF DISP 1 page
Item Description
DISP REC Displays the recording format.
FORMAT
DISP BIT RATE Indication of HQ, SP or LP
recording.
DISP SYSTEM System frequency
DISP FRAME Indication of frame rate during slow
RATE & quick-motion recording.
DISP 16:9 Aspect ratio indication when
recording SD signals
Zoom position indication
1)
DISP ZOOM
1) Focus setting
DISP FOCUS
DISP BATT Displays the battery voltage or
battery remaining capacity.
2)
REMAIN
DISP REC/PLAY REC, PLAY, F REV, and F FWD
indications
DISP TIME CODE Displays the timecode.
1) This item may not appear depending on the mounted lens.