To Switch The Information Displayed In The Thumbnail Screen; Changing The Thumbnail Image (Index Frame) Of A Clip - Sony CINEALTA PDW-F330K Operating Instructions Manual

function always cues up the first frame in a clip, even if the
thumbnail image has been changed.
To switch the information displayed
in the thumbnail screen
You can switch the clip information displayed at the
bottom of thumbnails. You can also switch the display of
thumbnail sequence numbers.
Note
The factory default setting is "TIME CODE".
Proceed as follows.
1
With the thumbnail screen displayed, hold down the
SHIFT button and press the SEL/SET button to the
bottom side (the CLIP MENU side).
The CLIP menu appears.
See page 100 for more information about the CLIP
menu.
2
Use the SEL/SET button or MENU knob to select
"CLIP INFORMATION", and then press the button or
knob.
A sub menu appears.
3
Use the SEL/SET button or the MENU knob to select
the information to display from among the following,
and then press the button or knob.
• DATE: Date of recording
• TIME CODE: Start timecode
• DURATION: Whole length of clip
• SEQUENCE NUMBER: Thumbnail sequence
number
The information displayed on the lower side of
thumbnails changes according to the item selected.
Example: When "SEQUENCE NUMBER" is selected
Thumbnail sequence number
Note
Some characters in clip names, clip list names, and titles
may be converted to "s" characters for display in the
thumbnail screen and CLIP menu. For details, see page 78.
Changing the Thumbnail Image
(Index Frame) of a Clip
In the thumbnail screen, normally the first frame of a clip
is displayed as the index frame.
To change this to show a different frame, proceed as
follows.
Note
You can also select (at 1-second intervals) a frame within
10 seconds of the first frame as the thumbnail image of the
clip at the time when you record a clip with this unit. For
details, see page 70.
1
With the thumbnail screen displayed, hold down the
SHIFT button and press the SEL/SET button to the
bottom side (the CLIP MENU side).
The CLIP menu appears (see page 100).
2
Use the SEL/SET button or MENU knob to select
"SET INDEX PICTURE", and then press the button/
konb.
This switches to the screen for selecting a clip for
changing the index frame.
3
Select the desired thumbnail, and press the SEL/SET
button or MENU knob.
The frame from the clip that is currently specified as
the thumbnail is displayed. In this state, you can use
playback or search.
83
Thumbnail Search