Miele H 7260 BP Operating And Installation Instructions page 79

Problem
Press OK for 6 seconds
appears in the display
when the oven is
switched on.
Power cut appears in the
display.
12:00 appears in the
display.
Max. op. hours reached
appears in the display.
 appears in
Fault F32
the display.

Fault F33 appears in
the display.
and a fault code
Fault
not listed here appears
in the display.
A noise can be heard
after a cooking
programme.
The oven has switched
itself off.
Cause and remedy
The  system lock has been activated.
 You can deactivate the system lock for a
programme by touching the OK sensor control for
at least 6 seconds.
 If you want to permanently deactivate the system
lock, select the
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
The power supply was interrupted for longer than
150 hours.
 Reset the time and date.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact the Miele
Customer Service Department.
The door lock for pyrolytic cleaning has not opened.
 Switch the oven off and then back on again.
 If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.
A fault has occurred that you cannot resolve.
 Call the Miele Customer Service Department.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
To save power, the oven switches off automatically if
a button is not pressed after a certain amount of time
or after a cooking programme has ended.
 Switch the oven back on.
Problem solving guide
Safety | System lock  | Off setting.
79