Figure 4-1. Removing The Front Shipping Bracket; Figure 4-2. Attaching The Ramp To The Pallet; Figure 4-3. Removing The Rear Shipping Bracket; Figure 4-4. Rolling The Cabinet Down The Ramp - Eaton Single EBC Installation And Operation Manual

6. Slowly roll the cabinet toward the front of the pallet. Continue rolling the cabinet down the ramp until the
cabinet is clear of the ramp (see Figure 4-4).
7 . Roll the cabinet to the final installation location.
8. If installing the cabinet permanently, retain the shipping brackets and hardware; otherwise, recycle the
pallet, ramp, and shipping brackets in a responsible manner.
9. Secure the EBC in position by lowering the leveling feet until the cabinet is not resting on the casters and
the cabinet is level.
10. If permanently mounting the system, proceed to Step 11;
11. Using the retained hardware, reinstall the shipping brackets removed in Step 2 and Step 5 to the front and
rear of the EBC with the angle facing outward (see Figure 4-1 and Figure 4-3).
12. Secure the cabinet to the floor with customer-supplied hardware.
Leveling Feet
Pallet
Rear Shipping Bracket
figure 4-1 . removing the front Shipping Bracket
figure 4-4 . rolling the Cabinet down the ramp
Front Door
Shipping Bracket Bolts
Shipping Bracket Bolts
16
External Battery Cabinets
Pallet
Ramp (side panel from wood container)
figure 4-2 . Attaching the ramp to the Pallet
Leveling Feet
Pallet
Rear Shipping Bracket
figure 4-3 . removing the rear Shipping Bracket
EBC
Shipping Bracket Bolts
Shipping Bracket Bolts