Table of Contents
Advertisement
3 Product Description
3 Product Description
3.1 General description
Description
The pump is a centrifugal, frame-mounted pump. The following pump features make it
easy to install, operate, and service:
• High efficiency
• Rugged construction
• Compact design
• Foot-mounted volute
• Center drop out coupler
• regreasable bearings
• Horizontal split case
Mechanical seal types
Mechanical
seal
Intended applications
WARNING:
This product can expose you to chemicals including Lead, which is known to the State
of California to cause cancer and birth defects or other reproductive harm. For more
information go to: www.P65Warnings.ca.gov.
The pump's bronze fitted construction make it ideal for use with the following liquids:
• Unheated domestic and fresh water
• Boiler feed water
• Condensate
• Hydronic cooling or heating
• Pressure boosting
• General pumping
• Benign liquids
3.2 Operational specifications
Maximum working pressure
The maximum working pressure is listed on the pump nameplate.
10
• Preferred over packing on some applications because of better sealing qualities and longer
serviceability.
• Leakage is eliminated when a seal is properly installed and normal life is much greater than that
of packing on similar applications.
• Pumps containing single mechanical seals normally utilize the pumped liquid to lubricate the
seal faces. This method is preferred when the pumped liquid is neither abrasive nor corrosive.
G&L Pumps Series A-C 8300 Base Mounted Centrifugal Pump INSTRUCTION MANUAL
Advertisement
Table of Contents
