Metso 7000 Series: 7150RR Series Installation Maintenance And Operating Instructions
Railroad, standard bore flanged ball valves
Hide thumbs
Also See for 7000 Series: 7150RR Series:
Subscribe to Our Youtube Channel
Related Manuals for Metso 7000 Series: 7150RR Series
Summary of Contents for Metso 7000 Series: 7150RR Series
- Page 1 Series 7000 Railroad, Standard Bore Flanged Ball Valves Series 7150RR, 7300RR & 730SRR 3" – 6" (DN 50 – 150) Class 150 & 3" (DN 50) Class 300 Installation, Maintenance and Operating Instructions...
-
Page 2: Table Of Contents
These instructions provide information about safe handling and operation of the valve. If you require additional assistance, please contact the manufacturer or manufacturer's representative. Addresses and phone numbers are printed on the back cover. See also www.metso.com/valves for the latest documentation. SAVE THESE INSTRUCTIONS! Subject to change without notice. -
Page 3: General
BODY RATINGS. ALL OF THE BODY AND SEAT RATINGS ARE OR COMPATIBILITY OF THE VALVE WITH THE INTENDED SERVICE, DEPENDENT ON VALVE TYPE AND SIZE, SEAT MATERIAL, AND CONTACT METSO FOR MORE INFORMATION. TEMPERATURE. DO NOT EXCEED THESE RATINGS! Valve Markings... -
Page 4: Transportation And Storage
CODES AND STANDARDS. CENTER THE FLANGE GASKETS MAINTENANCE CAREFULLY WHEN FITTING THE VALVE BETWEEN FLANGES. DO NOT ATTEMPT TO CORRECT MISALIGNMENT BY MEANS OF FLANGE 4.1 General BOLTING. Although Metso’s Jamesbury valves are designed to work under severe conditions, proper preventative... -
Page 5: Disassembly
IMO-R27 NOTE: Repair kits include stem bearings (70), secondary 8. Place the valve in the vertical position with the insert stem seal (71), seats (7), body seal (65) and stem seals (69). end up. Refer to the Service Kit chart (see Table 1). 9. -
Page 6: Assembly
IMO-R27 4.4 Assembly 8. Insert the stem (5), through the insert end of the body, being careful not to scratch the stem sealing surface; It is advisable to replace seats and seals if complete and press it gently up into the stem bore until disassembly and reassembly becomes necessary. -
Page 7: Pressure Testing The Valve
17. Place the spring (33) over the stem (5) with the larger diameter contacting the indicator stop (32). If testing the valve seat tightness, please contact Metso for advice. 18. Compress the spring (33) and hold down by putting the retaining ring (34) in the groove in the stem (5). -
Page 8: Exploded View - Valve
IMO-R27 EXPLODED VIEW - VALVE PARTS LIST ITEM NO. PART DESCRIPTION QTY. BODY INSERT BALL STEM SEAT COMPRESSION PLATE STUD LOCK NUT IDENTIFICATION TAG RIVET HANDLE INDICATOR STOP CONICAL SPRING RETAINING RING "BTM" ON UNDERSIDE OF HANDLE SCREW INDICATOR STOP ITEM 32 GROUNDING SPRING FACING COMPRESSION STOP BUSHING... -
Page 9: Exploded View - Insert Field Wrench
IMO-R27 EXPLODED VIEW - INSERT FIELD WRENCH Insert Field Wrench Parts List 3" & 4" (DN 80 & 100) = Kit# 40-044-0154-00, 6" (DN 150) = Kit# 40-044-0155-500 ITEM PART NAME QTY. Driver Plate Socket-Head Cap Screw Threaded Rod Hex Nut Flat Washer Die Spring Figure 9... -
Page 10: Valves
IMO-R27 Table 1 - Repair Kits Valve Size Seat Material 3"(DN 80) 4"(DN 100) 6"(DN 150) 7150/7300 7150 7150 PTFE (T) RKN-174TTT RKN-175TTT RKN-196TTT Filled PTFE (M) RKN-174MTT RKN-175MTT RKN-196MTT PFA Seats & Seals RKN-174BPT RKN-175BPT RKN-196BPT XTREME® RKN-174XTZ RKN-175XTZ RKN-196XTZ *For grounded valves, grounding washers listed below are also needed for ordering. - Page 11 IMO-R27 HOW TO ORDER JAMESBURY 7000 SERIES RAILROAD VALVES 7150 1. sign Valve Size (Inch / mm) 5. sign Body Material Size Range INCHES 3", 4", 6" Carbon Steel (WCB) 80, 100, 150 Alloy 20 (CN7M) Optional in all Sizes Stainless Steel (CF8M) 2.
- Page 12 IMO-R27 Subject to change without prior notice. Metso Flow Control Inc. Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 Vantaa, Finland. Tel. +358 20 483 150. Fax +358 20 483 151 North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, MA, 01545, USA. Tel. +1 508 852 0200. Fax +1 508 852 8172 South America, Av.
Need help?
Do you have a question about the 7000 Series: 7150RR Series and is the answer not in the manual?
Questions and answers