Metso Jamesbury 7150 Series Installation Maintenance And Operating Instructions
3", 4"& 6" (dn 80, 100 & 150) class 150 & 300 standard bore flanged ball valves equipped with kerotest handle assemblies
Hide thumbs
Also See for Jamesbury 7150 Series:
Subscribe to Our Youtube Channel
Related Manuals for Metso Jamesbury 7150 Series
Summary of Contents for Metso Jamesbury 7150 Series
- Page 1 3”, 4”& 6” (DN 80, 100 & 150) CLASS 150 & 300 STANDARD BORE SERIES 7150, 730S & 7300 FLANGED BALL VALVES EQUIPPED WITH KEROTEST® HANDLE ASSEMBLIES Installation, Maintenance and Operating Instructions...
-
Page 2: Table Of Contents
These instructions provide information about safe handling and operation of the valve. If you require additional assistance, please contact the manufacturer or manufacturer’s representative. Addresses and phone numbers are printed on the back cover. See also www.metso.com/valves for the latest documentation. SAVE THESE INSTRUCTIONS! IMO 11/17... -
Page 3: General
The inspection and maintenance frequency depends on for 3” & 4” (DN 80 & 100)Series 7000, and (kit #40-060- the actual application and process condition. 9022-00) for 6” (DN 150) Series 7000 from your local Metso Automation distributor. Kerotest Handle Disassembly NOTE: If complete disassembly becomes necessary, replacement of all seats and seals is recommended. -
Page 4: Assembly
IMO-261 EN The insert design requires that the insert be unthreaded in a counterclockwise motion using the following method using the insert field: Assemble the Mark Position field wrench as follows, (refer to figure 6): A. Place driver (A) into the insert slots. Insert Put the plate (C) on top of the driver (A). -
Page 5: Repair Kits/Spare Parts
2 in.-lbs. (33 Nm) using a cross pattern. For further information on spare parts and service or Slip the housing (9) over the installed bellows (7). assistance visit our web-site at www.metso.com/valves. Take care to avoid damaging the housing seal O-ring (16). -
Page 6: Exploded View - Figure 4
IMO-261 EN VALVE PARTS NAME QTY. Body Insert or CAP Stem, Inner Stem, Handle Ball SHOWN AS HALF Seats FOR CLARITY Bellows Assembly TYP. 4 Cover SHOWN AS HALF Housing FOR CLARITY Bonnet Extension Handle Body Seal Secondary Stem Seal Bearing Handle Seal, Bellows Seal, Housing... -
Page 7: Parts List
IMO-261 EN INSERT FIELD WRENCH PARTS LIST 3” & 4” (DN 80 & 100) = Kit # 40-044-0154-00, 6” (DN 150) = Kit # 40-044-0155-500) ITEM DESCRIPTION QTY. Driver Plate Socket-Head Cap Screw Threaded Rod Hex Nut Flat Washer Die Spring Figure 5 IMO 11/17... - Page 8 IMO-261 EN Subject to change without prior notice. Metso Flow Control Inc. Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 Vantaa, Finland. Tel. +358 20 483 150. Fax +358 20 483 151 North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, M A 01545, USA. Tel. +1 508 852 0200. Fax +1 508 852 8172 South America, Av.
Need help?
Do you have a question about the Jamesbury 7150 Series and is the answer not in the manual?
Questions and answers