Introduction And General Information - Graco RoadLazer RoadPak 24M143 Operation Manual

Introduction and General Information

Introduction
This manual and those supplied provide pre-setup
requirements, parts lists, setup, operation, and mainte-
nance instructions for the RoadLazer RoadPak
Tow-Behind System. This manual includes instructions
for a 2-pump system. For 1-pump systems, all parts
remain the same with the exception of plugged ports for
missing pumps and hoses.
General Information
The Tow-Behind System is attached to a vehicle and is
used to apply up to two stripes in one or two colors with
glass beading.
The Tow-Behind System consists of a Programmable
Skipline Controller, Displacement Pumps, two Paint
Spray Guns, and two Bead Spray Guns.
Programmable Skipline Controller
The Programmable Skipline Controller consists of the
control box and a 30 ft (9.1 m) cable. It is the main con-
trol for the Tow-Behind System and turns the spray guns
and accessories on and off.
3A2091B
Introduction and General Information
Simple Guide System
The Simple Guide System provides the user with a
pointer for alignment on either the left or right side of the
vehicle.
™
RoadView Camera System (optional)
The RoadView Camera System provides the user with
video of a bore sight view for alignment on either the left
or right side of the tow vehicle. The system consists of a
9 in. monitor, interfacing cables, video camera and
mounting bracket.
RPS 2900 Hydraulic Pumps
The RPS 2900 Hydraulic Pump supplies paint to the
spray guns. There are two displacement pumps. Two
displacement pumps allows the user to have a two-color
system.
Paint Spray Guns
The Paint Spray Guns are pneumatically triggered to
spray paint stripes when commanded by the Program-
mable Skipline Controller.
Bead Spray Guns
The Bead Spray Guns are pneumatically triggered to
spray reflective materials when commanded by the
Programmable Skipline Controller.
7