Si04-960
Step
3. Remove the front panel.
Open up the panel to
1
the position higher than
where it stops.
2
Remove the front panel
from the unit.
Removal Procedure
Procedure
Rotation axis
Slide the center rotation axis to the left and remove it out.
Removal of Air Filter
Points
Support the front panel by one
hand, while remove the rotation
axis at the upper center by the
other hand.
(R2513)
When reassembling the front
panel, make sure that the
rotation axes are in the guide
groove, and then shut the
panel.
(R2514)
(R2512)
3