Download Print this page

Connecting Peripheral Devices - Fujitsu PRIMERGY RX600 S3 Start Manual

Sas model

Hide thumbs Also See for PRIMERGY RX600 S3:

Table of Contents

Pull the slide rails toward the front until

they click into place.

Attach the server to the slide rail.

Insert the screws of the server to the rail holes, and

push in them to lock.

��

Connecting peripheral devices

Peripheral devices, such as the keyboard and mouse, should be connected to the server in the follow-

ing order.

When connecting cables, make sure to maintain the space for drawing out the server of the rack.

�� KVM Switch

��

��Disply

��Mouse

��Keyboard

Install the server in the rack cabinet.

Push the locks on the right and left of the slide rails

to unlock them. Slide the server into the rack, push-

ing it on so that the rear side of the server may float

a little.

��

Be careful when sliding the server into the cabinet.

There is a fear you may pinch your fingers or catch

your clothing.

Secure the server to the rack.

Secure using 2 M5 thumbscrews.

��

Table of Contents