ReliOn MICRO User Instruction page 58

Step 1: Insert a test strip as shown
in the diagram. Test strip should
seat firmly into meter. The meter will
turn on automatically. The full screen
will come on for a moment. Make
sure all symbols appear on the screen
(see page 12). The last result will
then appear. Then the code number
(F-2, F-3, or F-4) will appear for three
seconds followed by the Apply Blood
. Make sure the code
Symbol
number on the screen matches
the code number on the test strip
bottle. If the screen code does not
match the test strip code, use a new
test strip. If code still does not match,
use a new bottle of test strips or call
Customer Service at 855.776.0662,
7 a.m. to 7 p.m. central time, 7 days
a week.
58