ReliOn MICRO User Instruction page 32

If it takes longer than 20 seconds to obtain a blood sample and to touch
the test strip to the blood drop, repeat Step 3.
Step 4: The meter will count down showing a
flashing dash. After 7 seconds, a beep sounds,
and the test result is shown.
Results will be shown in units of mg/dL.
Record result in your logbook.
Step 5: When the test is done, pull the test
strip out, and dispose of it. The meter
automatically shuts off when you remove
the test strip.
Remove the lancet from the lancing device.
Dispose of the used lancet according to
local guidelines.
32