Test Average Display - ReliOn MICRO User Instruction

Setting Test Average Display
NOTE
• 'Lo' results are included as 20 mg/dL in the averages
• 'Hi' results are included as 600 mg/dL in the averages
• T est results with the following symbol or flag are not part of the
result average: temperature error symbol, control solution flag,
or delete flag
Press the button to cycle through the test
averaging choices: 'oFF' (not displayed),
'7' (7-day average), '14' (14-day average),
or '30' (30-day average).
If you select either 7-day, 14-day, or 30-day
averaging, your average test result will appear
when you recall results from memory.
See page 65.
After you set the test averaging, press the
button to confirm the setting.
25