Basic Rules - ReliOn MICRO User Instruction

Basic Rules for Meter Setup
Step 1: Turn off meter.
Step 2: Press the
for 5 seconds. A beep sounds and the meter turns on.
Next, a second beep sounds and "SET" shows on
the screen.
Step 3: Use the
the button, the setup screen changes in the order shown in the
diagram to the left. Press the
setup screen menu.
Note
• If you need to go back to a setting, you must scroll through each
setup option. You cannot go backwards in setup mode.
• In setup mode, the meter will turn off automatically after 3 minutes
of nonuse.
and buttons at the same time
button to change the setup screen. When you press
button to change a setting within a
19